Creality Ender-3 Pro is an upgraded version of Ender-3 3D printer with 220 x 220 x 250 mm build volume, a “C-MAG” removable magnetic bed, a power recovery mode, and a tight filament. For a much bigger printing size, you can consider the Creality Ender 6, which offers a 250 x 250 x 400 mm printing size.
Where to Buy Creality Ender-3 Pro 3D Printer
AliExpress – See Offers | Amazon US – See Offers | Banggood – See Offers
This affordable desktop 3D printer is easy-to-setup with a pre-built X and Y axis and a small radial fan to cool the part. It comes an 8GB gigabyte SD card and an LCD touch screen.
Creality Ender-3 Pro 3D Printer Key Features
- FDM 3D Printer
- Built-in X and Y axis
- LCD Touch Screen Control
- Large Print Size: 220 x 220 x 250 mm
- Nozzle Temperature ≤ 260℃
- Bed Temperature ≤ 110℃
- C-MAG Magnetic Printing Bed
- Working Mode: Online or Offline (via SD Card)
- Power Failure Recovery
Design
Compare to its predecessor, the Creality Ender-3 Pro has been redesigned with a more sturdy, 40×40 aluminum extrusion for the Y-axis base which makes the printing surface much more stable.
Unlike most 3D printers, the Creality Ender-3 Pro 3D Printer is easy to assemble thanks to it modular DIY structuring which makes it easy for anybody to put together.
This printer also comes with V-slots and plastic rollers which handles the linear motion. The V-Slot with POM wheel makes it move smoothly. It can also double as linear rail, greatly reducing the cost of parts for motion control.
In addition, the creality 3D Ender-3 Pro comes with C-MAG magnetic printing bed which makes printing easy. The bed is removable and flexible, making it easier to remove finished prints off of the build surface.
The textured surface adheres to all types of filament better than traditional methods. Therefore, at the end of every printing, remove the magnetic sticker from the lower and bend or flex the print surface to watch the model effortlessly pop off the printing surface.
This printer comes with an ergonomically designed larger bed leveling nuts, which makes leveling the bed much easier and more precise, so you have more time printing, and less time leveling.
On the right-hand side of the Creality Ender-3 Pro frame is an attached LCD display with a clickable control wheel. Furthermore, at the bottom of the printer sits a small radial fan at the bottom of the 3D printer to cool the part.
Build and Print Volume
Creality Ender-3 Pro 3D Printer offers a large 220 x 220 x 250 mm printing volume nearly double that of the Ender 2, thus, offering more of your printing requirement for large prints.
The printer offers up to 180mm/s max print speed which makes it one of the fastest 3D printers but can be regulate to move slower so as to curb print quality drop, and filament slip due to speed.
Print Quality
The implementation of a sturdier and wider aluminum extrusion at the Y-axis base of the printer is the most important feature as far as print quality.
In addition, with the 1.75mm filament, this printer can create a variety of different products. Typical this FDM printer have a layer thickness of 0.2 or 0.3 mm, hence, offer a resolution of as low as 0.2µm which is set to print up to 50 microns all thanks to the X-Y axis dimensions and the 0.4mm nozzle.
It prints in a common variety of filaments including PLA, ABS, Soft Glue, Wooden, Copper Containing, Gradient and Flexible Materials.
MK8 Extruder
This 3D printer comes with the MK8 extruder which is located directly above the hot-end nozzle insures. Such an arrangement minimizes the travel distance of the filament to the hot end and can allow for more reliable 3D printing of flexible filaments.
The extruder is mounted on the printer’s frame. It pushes and pulls filament through a long tube and in to the hot end.
Power Failure Detector
Creality Ender-3 Pro 3D Printer comes with a built in sensor to detect power failure, so as to activate power failure recovery. The recovery sensor helps automatically resumes printing when power is back on.
This printer thermal runaway protection helps keep you safe from printer malfunctions and provide power loss recovery (resuming a print after the power goes out).
BL Touch proximity Sensor
Creality Ender-3 Pro 3D Printer also comes with the BL Touch sensor which is an auto leveling sensor for 3D Printers that can precisely measure the tilt of Bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
C-MAG Magnetic Printing Bed
Ender 3 Pro has a new C-Mag magnetic platform sticker on its build surface. The printer however comes with a similar build surface to that of its predecessor, just slightly softer.
Furthermore, The build surface is attached to the build plate by magnets. This surface itself is very flexible and has a grainy texture.
Above all, this bed heats up with in 5 minute of been powered and supply rapid heats to the print bed to up to 110℃.
Compare Prices
Software
The Creality Ender-3 Pro 3D Printer comes with Cura 3.0.2 software. Inside the box, Creality provides you with an SD card that holds a Cura version, but for Windows only. But Mac or Linux version can be downloaded on the Ultimaker website for free.
In addition, the software works with the Ender 3 Pro interface.
Cura, which is a slicing program (slicing software) turns a 3D model and slices it into layers (or G-Code) so that the printer understands what to print. The interface is pretty simple to operate and customizable.
This interface is the same as for any other Creality 3D printer. It offers some of the more obscure settings, but overall, it’s relatively easy to use.
Creality Ender-3 Pro 3D Printer Price and Availability
Creality Ender-3 Pro 3D Printer price starts at around $205.99 depending on the store. It is available at retailers like AliExpress, Amazon, Banggood, and Gearbest.
Creality Ender-3 Pro 3D Printer Specs
Here are a few specs of the Creality Ender-3 Pro 3D Printer:
General Features
- Type: FDM 3D Printer
- Frame: Aluminum Ender’s Cube Frame
- Screen: LED touchscreen
- Print Resolution: X-Y Axis (50 microns)
- Maximum Print Speed: 0.1 mm – 180 mm/s
- Printing Filament: PLA, ABS, Soft Glue, Wooden, Copper Containing, Gradient and Flexible Materials
- Maximum Travel Speed: –
- Build Volume: 220*220*250 mm
- Maximum Build Plate Temperature: 110℃
- Software: Cura, Repeti-Host、 Simplify 3D
- Dimension: 440*410*465mm
- Weight: 8.6 kg
- Control Board: –
- Nozzle Temperature: 260℃
- Filament Diameter: 1.75mm
- Nozzle Diameter: 0.4mm
- Connectivity: USB, TF Card
- Power Requirement: Input: AC 100-120V / 6.8A 200-240V/3.4A 50/60Hz Output:DC 24V 270W
